On the wide railway tracks, the train is like a giant, shuttling between the earth, carrying the hopes and dreams of countless travelers. As the foundation support of railway lines, sleepers play an indispensable role. We need to pay extra attention to the storage of anti-corrosion sleepers before installation, as it is related to the stability and safety of railway lines.

Perhaps you may wonder, what else should be noted when storing anti-corrosion sleepers that are not afraid of water, wind, or sun? Don't worry, I will come all the way for you.

Firstly, although the anti-corrosion performance of the sleepers has been greatly improved after anti-corrosion treatment, they are not always ineffective. If stored improperly for a long time, its anti-corrosion ability will also be affected, which in turn will affect its service life. So when storing, we must be careful and avoid exposing it to the outside environment as much as possible.

For example, try not to stack anti-corrosion sleepers in open areas, and choose a building or a sheltered location. This can effectively isolate the erosion of natural elements such as sunlight, rain, wind and snow, and extend the service life of the sleepers. If it is impossible to avoid storing in an outdoor environment, at least measures such as shading and covering should be taken to minimize the adverse effects of various climatic factors on the sleepers.

In addition, we also need to pay attention to the geographical environment of the storage site. Choose a location near the seaside or factory discharge area, as the air contains more corrosive substances, which can also accelerate the aging of the sleepers. So it's best to stay away from these areas and choose a relatively quiet and dry environment for storage.

On the other hand, we also need to pay extra attention to the specific storage method. For example, avoid stacking sleepers directly on the ground, as damp ground can also affect the service life of anti-corrosion sleepers after installation. You can arrange wooden pads on the ground and then stack the anti-corrosion sleepers to isolate moisture. At the same time, do not stack the sleepers too high to avoid excessive weight on the lower sleepers, which may cause deformation.

Finally, it is important to pay attention to the stacking order during storage. On the premise of ensuring "big at the bottom and small at the top", try to stack anti-corrosion sleepers of the same specifications in one place as much as possible to avoid size confusion and even errors during transportation. At the same time, caution should be taken during the transportation process to minimize damage to the sleepers.

So, even the most durable anti-corrosion sleepers that are not afraid of water, wind, or sunlight should be stored with extra caution. Only by taking various protective measures can we ensure that the sleepers are in good working condition before being transported to the railway for installation, and contribute their due efforts to the railway industry.