Yards of the log mills are generally large. The yard was full of piles of wood. The piles were too high for people. A way was left between them. Forklifts could drive in and out. Outsiders looking at feel empty, so large place, on a few piles of the wood. In fact, it is not empty. This yard is used for drying water with plain sleepers.
Su Zhen is not immersed in oil blank, into factory, from finished product is still early, middle had two big pass, air and soakage. One in the stack, one in the can, occupying space front and back.
Let's talk about it. Sawn plain sleepers can't be put into jars immediately. The newly cut wood has a large amount of water. You can see the wet stubs when you cut it. The oil can't enter the position until the water goes out first. It will not be short of days. A batch of plain sleepers were sawn out, piled into piles, and remained in the yard until they were fully occupied. Air to what share just count, each have their own number, in short not to rush.
The trouble is, the air is waiting for work, other processes can not be stopped. The saw saw every day, the jars waiting to load, waiting for goods. The batch in the air occupied the place, and the batch newly saw out had to be sent to the hospital. In addition, there were several pieces of wood in the yard waiting to be put in the air, those out of the jars spreading the tail, and those in bundles waiting to leave. Every batch has to be put in a place, less space, which processes have to stop and so on. The day went by with the sound of the saw, the piling of the trucks, the loading of the trucks with the open doors and so on.
There is another reason to occupy land. The wood dries and winds through the cracks. If the stack is stacked tightly, the wood in the middle can not see the wind, and the core is still damp for how long. Therefore, the stacking has the stacking code method. A passage for passing the vehicle is left between the stacks. The wood in the stack is coded layer by layer, and strips must be placed between the layers to support the seam. The strips must be aligned up and down. If a line is stagger, the stack will be askew. The bottom of the stack should also be raised above the ground. Piling also have to look at the wind, along the local permanent wind road code, the wind can wear from one end to the other. The same batch of materials, so spread out, occupy the land than the stack of a few times the size of the code. The yard is not big enough to be spread out.
The yard is also divided. The stack area is a piece of land, and there is an empty field beside the jars. The sleepers that come out of the jars end there. The position close to the door is reserved for loading. What can be done with which piece? It can not be opened wrongly.
The yard was not only a pile of plain sleepers. The logs entering the site shall also be piled up first, waiting for the upper saw, and the log piles shall be one by one, but also a large area. The raw materials here are waiting to be processed, and the plain sleepers here are waiting to be aired. They are all arranged in a courtyard.
The yard is not only for drying wood, but also for moving cars. In and out of the material transport trucks, finished goods loaded cars waiting to side, stack side of the road is left for them. When to load, load how many, have to follow the stack position. The edges of the stack shall be provided with parking space, and the stack head shall be provided with reserve for backing up. If the pile is dead and the car can't get in, worry.
In the fall, the yard is at its fullest. North autumn, dry weather, sun is not toxic, wind and benefit, is a good time to air wood, manufacturers are running to air a few more batches, before winter to prepare materials.
This is how the compound is used. The place is abundant, and the life is not idle. Which one is empty, but also temporary time and space, with thein two days, there are new materials to make up.
